Art nr: 0902
Knife Type: Santoku knife
Place of Origin: Sweden, Japan
Brand Name: Ryda knives
Model name: A-30 Santoku knife
Blade material: 3 layers high carbon damascus steel (316/316l & Aus-10 powder steel)
Handle material: Stabilized figured walnut
Grind angle: 2x15%
Hardness: 60 HRC
Length: 32cm
Blade length: 7 inch /18cm
Handle length: 13,5cm
Blade width: 4,7cm
Thickness: 2 mm
Weight: 175g

"In the A-30 serie I have gone back to the roots of being a chef. When you work in kitchens you most likely hold your knife more on the blades then the handles. 
This serie have been designed to be comfortable to chop for hours. The balance is also higher up on the blade compare to our other knives. 
It have a very soft bolster and hard polished on the end of the blade next to the handle so you will not have pain in you finger after
you have worked with the knife for many hours." 

This handle on our A-30 serie is pretty slim 2,4x2,2cm on its thickets spot on the handle.
And is more ment to hold on the blade. So if you are use to hold your hands just on the handle this knife might not be to you. 
Its more a Japanese style of knife. 

The core of the blade is a Aus-10 steel and has a hardness of 60HRC. The other bearings are made of stainless steel 316/316l and together they have been vacuum-treated. This means that the sharpness lasts a long time with easier knife care.

The walnut handle has gone through a vacuum and clue infuse treatment, so its very hard.

Art nr: 0903
Knife Type: Utility knife
Place of Origin: Sweden, Japan
Brand Name: Ryda knives
Model name: A-30 Utility knife
Blade material: 3 layers high carbon damascus steel (316/316l & Aus-10 powder steel)
Handle material: Stabilized figured walnut wood
Grind angle: 2x15%
Hardness: 60 HRC
Length: 25,2cm
Blade length: 5inch /12,7cm
Handle length: 11cm
Blade width: 2,7cm
Thickness 2 mm
Weight 75g

"In the A-30 serie I have gone back to the roots of being a chef. When you work in kitchens you most likely hold your knife more on the blades then the handles. 
This serie have been designed to be comfortable to chop for hours. The balance is also higher up on the blade compare to our other knives. 
It have a very soft bolster and hard polished on the end of the blade next to the handle so you will not have pain in you finger after
you have worked with the knife for many hours." 

Art nr: 0601
Knife Type: Chef knife
Place of Origin: Sweden, China, France
Brand Name: Ryda knives
Model name: A-73 Legacy Chef knife
Blade material:73 layers high carbon damascus steel (316/316l & ST650 powder steel)
Handle material:Figured olive wood
Grind angle: 2x15%
Hardness: 62±1 HRC
Length: 35,5cm
Blade length: 8 inch /21cm
Handle length: 14,5cm
Blade width: 5,1cm
Thickness 2,3 mm
Weight: 200g

This knife is our Red Dot award 2024 winning knife!
To win this Red Dot award is a huge milestone for us as we are a pretty small company and we would never dream to win this price.
There is also few knife companies in the world that have got a price in the Red Dot Award and now we are one of them. :-D
It will be official 10 of October 2024 but we are soft launching our A-73 legacy knife and the serie it belongs to now as it have been pretty many people asking for them :-)

My vision of our A-73 serie was to make each knife special balanced and comfy to work with but still have same feeling of holding them.
So for this chef knife the balance point is slightly up on the blade to make best high pinch kitchen knife. So if you just hold on the handle it will be a little front heavy.
It have a similar design as our A-30 kitchen knives. but weight 20g more and a little thicker.
So for those that hold pretty high up on the blade they would love this knife.
And very few knives are made like that in my opinion.
To succeed this we needed to make some adjustment inside the bolster that was pretty tricky.
As we didn´t wanted to shorter the handle too much.


The handle is made of olive wood for it smoothness. We use our St650 powder steel (you could read more about it on our homepage or below) and use a classical pattern in our blade. Compare to the Legacy knife that have a wave pattern.
And we used pretty high sand pressure so the pattern be more visual. But also make the blade have a little more texture.

ST650 powder steel is a new steel type me and my partners have developed. 
ST650 powder steel is tested with the
ISO 29581-2 / SP0653 /SP1494 standards
C 1,32
Si 0,4
P 0,029
Cr 13,1
V 3,1
Mn 0,39
Co 0,12
Nb 0,47
Mo 2,0
W 1,0

Art nr: 0503
Place of Origin: Sweden, China, France
Brand Name: Ryda knives
Model name: ST650 Utility knife
Blade material:73 layers high carbon damascus steel (316/316l & ST650 powder steel)
Handle material:Figured olive wood
Grind angle: 2x15%
hardness: 62±1 HRC
Length: 26cm
Blade length: 5inch /13,4cm
Handle length: 12,5cm
Blade width: 3,2cm
Thickness 2 mm
Weight 75g

We decided to create a small serie called A-73 after we won the price for our A-73 legacy knife. The award we won is the Red Dot Award 2024. Its a huge milestone for us as we are a pretty small company and we would never dream to win this price.
There is also few knife companies in the world that have got a price in the Red Dot Award and now we are one of them. :-D
It will be official 10 of October 2024 but we are soft launching our A-73 now as it have been pretty many people asking for them :-)

The handle is made of olive wood for it smoothness. We use our St650 powder steel (you could read more about it on our homepage or below) and use a classical pattern in our blade. Compare to the Legacy knife that have a wave pattern.
And we used pretty high sand pressure so the pattern be more visual. But also make the blade have a little more texture.

ST650 powder steel is a new steel type me and my partners have developed. 
ST650 powder steel is tested with the
ISO 29581-2 / SP0653 /SP1494 standards
C 1,32
Si 0,4
P 0,029
Cr 13,1
V 3,1
Mn 0,39
Co 0,12
Nb 0,47
Mo 2,0
W 1,0

Art nr: 0901
Knife Type: Chef knife
Place of Origin: Sweden, Japan
Brand Name: Ryda knives
Model name: A-30 Chef knife
Blade material: 3 layers high carbon damascus steel (316/316l & Aus-10 powder steel)
Handle material: Stabilized Figured walnut
Grind angle: 2x15%
Hardness: 60 HRC
Length: 34,5cm
Blade length: 8 inch /20,5cm
Handle length: 13cm
Blade width: 5,2cm
Thickness 2 mm
Weight: 188g

"In the A-30 serie I have gone back to the roots of being a chef. When you work in kitchens you most likely hold your knife more on the blades then the handles. 
This serie have been designed to be comfortable to chop for hours. The balance is also higher up on the blade compare to our other knives. 
It have a very soft bolster and hard polished on the end of the blade next to the handle so you will not have pain in you finger after
you have worked with the knife for many hours." 

This handle on our A-30 serie is pretty slim 2,4x2,2cm on its thickets spot on the handle.
And is more ment to hold on the blade. So if you are use to hold your hands just on the handle this knife might not be to you. 
Its more a Japanese style of knife. 

The core of the blade is a Aus-10 steel and has a hardness of 60HRC. The other bearings are made of stainless steel 316/316l and together they have been vacuum-treated. This means that the sharpness lasts a long time with easier knife care.

The walnut handle has gone through a vacuum and clue infuse treatment, so its very hard.