Ham holder made in Spain with the best characteristics: its base is made of European white beech and its surface is eco-friendly, which makes it suitable for children and domestic, and all its ironworks are made of stainless steel AISI-304 and black polyethylene PE-500. It includes a folding headrest with rotatory bushings, which allow the rotation of the ham as much as you please without removing it from the ham holder, and a folding, v-shaped piece made of polyethylene PE-500 at the bottom part of the ham holder, allowing us to place the ham without employing any spikes that might damage it as well as it protects the knife edge.

Our Elite models facilitate ham cutting to practitioners, as they allow a versatile movement. We can place the ham into the desired position by moving the lever, covering 80º of roll angle to facilitate the third cut of the ham, while the piece is perfectly fastened. These models are detachable for easy transportation, which makes them compatible with our professional suitcase. To guarantee its optimum fastening, this Ham holder includes four non-slip, silicone legs.

Ham holder made in SPAIN, using top-quality, European white beech, with ironworks in a chrome shine finish and stainless steel spikes AISI-304. Thanks to its system of rotatory bushings, you can rotate the ham as much as you please without removing it from the ham holder, and its design allows us to make an easy and comfortable vertical cut.

Its new conical rotatory bush facilitates the entry of the hoof into the bush and includes two stainless steel spikes AISI-304 inside the bush, something very useful to attach and hold the ham more precisely. The new design of the lower part, where the thickest part of the ham is placed, allows us to place the ham without employing any spikes that might damage it. This way, the ham is perfectly fastened in any position, even when it is turned upside down.

In our PREMIUM range, the finish from the wood surface is eco-friendly. Its water-based lacquer makes it suitable for children and domestic use, complying with EN-71-9, EN-71-10 and EN-71-11 standards as it does not contain toxic organic substances. It is also worth to mention that according to the directive 2002/72/EC and its subsequent modifications 2005/79/EC, the resins contained do not include any toxic or hazardous compound that may contaminate food.

Ham holder made entirely in SPAIN, using top-quality, the base is made of APM-500 black colour, with ironworks in a chrome shine finish and stainless steel spikes AISI-304. Thanks to its system of rotatory bushings, you can rotate the ham as much as you please without removing it from the ham holder, and its design allows us to make an easy and comfortable vertical cut.

Its new conical rotatory bush facilitates the entry of the hoof into the bush and includes two stainless steel spikes AISI-304 inside the bush, something very useful to attach and hold the ham more precisely. The new design of the lower part, where the thickest part of the ham is placed, allows us to place the ham without employing any spikes that might damage it. This way, the ham is perfectly fastened in any position, even when it is turned upside down.

The base of the ham holder is made of black APM-500, this polyethylene stands out for its very low humidity absorption. Its main characteristics are its rigidity, toughness and good resistance to wear and tear and abrasion, due to its good resistance to chemical substances. This material is insensitive to attack by most acids and alkalis. This material is technically compatible and meets all requirements for food contact.

BUARFE's star ham holder, manufactured in Spain. A polished base made of AISI-304 stainless steel with 6 mm thick, with a gloss finish, a new stylized AISI-304 ironwork in stainless steel that highlights the ham and gives it prominence, a symmetric design to personalize the placing of levers on the right side or on the left side of the holder to each user's taste, accompanied by the upper head and the lower V in black PE-500 polyethylene. Pieces that are closer to the ham are made of black PE-500 polyethylene to safeguard the edge of the knives. The reduction of the cutting height is 4 cm, so it is ideal to work in a comfortable way.

A folding upper head with a rotating cap of greater diameter that enables us to turn the ham around without having to release the leg, it includes a movement to the left/right to correct any deformity of the leg of ham and with spikes on the rotating cap that enable us to hold it firmly at the same time as it centers that foot to turn it later around.

A lower V that is designed not to harm the ham and gives us a great fastening without using spikes with an articulated arm that enables us to reduce the fastening distance and is ideal to cut shoulders. Since this articulated arm has a great number of movements, it enables us to make the third cut without having to balace the holder.

The new Champions model gives us more freedom of movement, its 80º balance enables us to cut the ham in vertical position and to do it for the third time in a comfortable and effective way. A new more efficient 360º cap design, we stop the turn in the chosen position with a minimal pressure of the lever. This turn is ideal to peel the piece, we don't have to move from our place to access all parts of the ham and it is also ideal to show it to the costumer before slicing it.